Control of the Commons

• Project description: http://timesup.org/coc/
• Project Blog: http://coc.timesup.org
• Project call: http://timesup.org/content/call-participation-control-commons

These working notes are for those interested in supporting the project or who are involved. Feel free to add, edit, extend and assist.

They are ongoing and will be updated as we move into phase 2.

The Murray river will involve the second construction of a vessel and the first journey. The construction will happen in Port Adelaide, transport to the launching place will be from our support team.

One question that remains very open is our expected speed along the river. Which is closely dependent upon the water speed. On one extreme we have:

“With the exception of Weir 6, Murtho, the weir pool of each storage extends to the storage upstream. Therefore, the River Murray between Blanchetown and Wentworth is more like a series of lakes than a lowland river, particularly when river flows are low.” from http://www.murrayriver.com.au/about-the-murray/locks-weirs-dams-barrages/

From the flow rate measurements, estimating the river width at around 150m and the depth 4m (probably too deep) we get a speed around 500 m / hour, i.e. half a kmh. because we overestimate the cross section of the river, this number is probably too low.

From people travelling on various European rivers, upstream as well as downstream, we have travel distances around 40 km per day. This seems too high.

We experienced speeds from 0kmh, mostly around 1-1.5kmh and maximally 4kmh just from the current.

Vessel construction and testing January 23-28, Journey 1-21 February, Parade 24 February.

Launching around Ned's point or Lock 9.

Travel is expected to be between 20 and 40 kilometers per day, based upon experiences of 2 similar projects. Water currents will be important. The can be found [[here]http://riversmart.net.au/Flowtracker.htm], and it seems that if we take the river to be 150m wide and 4 meters deep, the flow at the SA border is around 0.5 kmh, compared to 4-6 on the Danube. Maps of the river are available here: http://www.rmboa.org.au/maps.html

The vessel will be built from scavenged, recycled or otherwise low impact parts.

• Plan 1 involves a lot of scrap celerytop wood to build a punt.
• Plan 2 involves using scrap rowing vessels
• Plan 3 involves using some old hull and extras, as the Subak in Linz.

Sail will be a junk rig, oars will be used and possibly a Yuloh. A tentative plan for pedal power exists - details at the beginning of January.

We used a small solar panel, 25 x 35 cm (wattage unknown!) to recharge our batteries: phones, GoProcamera, SLR, AA batteries, etc. We found that the Inca charger (will find link) worked really well and enabled us to charge all these things easily.

We also used small rechargable lights / USB chargers (link to follow) which were great in the evening as the light ws diffuse and they could also be used to “shock-charge” a USB powered device to bring it back to life.

Some things to bear in mind for the Fringe parade finale on 24 Feb.

• All floats must not exceed 4.3m in height. This height includes the vehicle plus any parade participants on the float.
• The parade will only be viewed from the east side of King William Street, so you only need to decorate the front and right side of your vehicle/float.
• There will be a DJ playing throughout the parade route.

Things we will need: please edit as things become available.

Short version here, long version below:

• power tools: saws, planes, welding gear, etc
• cables
• Handtools: saws, hammers, spanners, chisels, etc
• Radio or outback telephony
• anchor, fenders
• First Aid kit

• Hull(s): dinghies, windsurfers (old, large)
• canvas or other cloth for sails
• Wood for mast (simple pole) max 450cm, and for yard
• bamboo for battens
• rope and small cord
• pulleys
• construction wood and plywood for floors, lee boards, etc

• circular Saw
• jigsaw
• band saw
• power drill, drill bits (wood and steel)
• cordless drill, drivers
• power sander
• power plane
• grinder
• welding equipment
• power cables
• power boards
• hand saw
• hacksaw
• Screwdrivers
• pliers
• Spanners
• Hammers
• wood chisels
• plane
• sewing machine
• scissors
• sanding blocks
• Camping equipment: flies, mosquito nets, tents, sleeping mats, hammocks, cooking gear
• Radio or outback telephony
• Storage battery and Inverter (12V DC to 220V AC)
• waterproof camera
• anchor
• First Aid kit
• fenders
• bicycle
• Bike-powered power supply (Greer brings this)

• Hull(s): dinghies, windsurfers (old, large)
• canvas or other cloth for sails
• Wood for mast (simple pole) max 450cm, and for yard
• bamboo for battens
• rope for sheeting
• small cord for sail preparation
• pulleys
• eyelets
• construction wood for floors, paddles, etc
• Plywood for lee boards, floors, etc
• screws, nails
• ropes for rigging
• flat strapping
• sandpaper
• all that stuff you just might need….

The following people have registered interest. Contact coc (at) timesup.org if you would like to join in for building or (part of) the journey.

• Greer Allen: journey, bikes, adventure, www.magrev.org.au/
• Simon and Pix : Bike drive for Parade (Hackerspace Adelaide) http://hackerspace-adelaide.org.au/
• Deb Shaw: parade wrangling http://riaus.org.au/
• Cobi Smith: journey, community contacts, adventure, http://riaus.org.au/
• Tim X: journey
• Tim Boykett: journey, boats, planning (eek!) http://timesup.org
• Pippa Buchanan: journey, friendship and kinship, maps and learning. http://pippabuchanan.com/
• David Boykett: boat builder (tentative)
• Andreas Strauss: journey, pedal drive (tentative) http://andreasstrauss.com/

• McCormick Centre for the Environment in Renmark:

http://www.murrayriver.com.au/river-management/mccormick/

• Country Arts in Murray Bridge:

http://www.murraybridgegallery.com.au/

• Wherever suits

http://www.rmboa.org.au

• Link with Just Add Water - Fringe in Goolwa?

http://www.adelaidefringe.com.au/fringe-in-goolwa